Vivotek IP8361 Home Security System User Manual


 
VIVOTEK
User's Manual - 61
Audio and Video
This section explains how to cogure the audio and video settings of the Network Camera. It is
composed of the following two columns: Video Settings and Audio Settings.
Video Settings
Video title: Enter a name that will be displayed on the title bar of the live video.
Color: Select to display color or black/white video streams.
Power line frequency: Set the power line frequency consistent with local utility settings to eliminate image
flickering associated with fluorescent lights. Note that after the power line frequency is changed, you
must disconnect and reconnect the power cord of the Network Camera in order for the new setting to
take effect.
Iris mode: Select a proper iris mode for your environment.
Select caching stream: This Network Camera supports time shift cache stream on the Network Camera.
Select one stream and check the below option Enable time shift caching stream.
Enable time shift caching stream
Advanced Mode
: Check this item to enable the time shift cache
stream on the Network Camera, which will store video in the camera’s embedded memory for a period of
time depending on the cache memory of each Network Camera. This function can work seamlessly with
VIVOTEK’s ST7501 recording software. When an event occurs, the recording software can request time
shift cache stream from the camera, which allows the user to get an earlier video recorded before the
occurence of an important event.
Video orientation: Flip--vertically reect the display of the live video; Mirror--horizontally reect the display
of the live video. Select both options if the Network Camera is installed upside-down (ex. on the ceiling)
Video Title
Title and Time
Video 17:08:56 2008/06/25