Vivotek IP8361 Home Security System User Manual


 
VIVOTEK
70 - User's Manual
Video Quality Settings
Click the stream item to display the detailed information. The maximum frame size will follow your
settings in above sections.
This Network Camera offers real-time H.264, MPEG-4, and MJEPG compression standards (triple
codec) for real-time viewing.
If H.264 or MPEG-4 mode is selected, the video is streamed via RTSP protocol. There are four
parameters for you to adjust the video performance:
■ Frame size
You can set up different video resolution for different viewing devices. For example, set a smaller
frame size and lower bit rate for remote viewing on mobile phones and a larger video size and a higher
bit rate for live viewing on web browsers. Note that a larger frame size takes up more bandwidth.
■ Maximum frame rate
This limits the maximum refresh frame rate per second. Set the frame rate higher for smoother video
quality. The maximum frame rate is also reated and limited by the video options.
If the power line frequency is set to 50Hz, the frame rates are selectable at 1fps, 2fps, 3fps, 5fps,
8fps, 10fps, 15fps, 20fps, and 25fps. If the power line frequency is set to 60Hz, the frame rates are
selectable at 1fps, 2fps, 3fps, 5fps, 8fps, 10fps, 15fps, 20fps, 25fps, and 30fps. You can also select
Customize and manually enter a value. The frame rate will decrease if you select a higher resolution.