Filter
Top Products
VIVOTEK
User's Manual - 91
■ Camera tampering detection
This option allows the Network Camera to trigger when the camera detects that is is being tampered
with. To enable this function, you need to congure the Tampering Detection option rst. Please refer
to page 77 for detailed information.
Event Schedule
Specify the period for the event.
■ Select days in a the week.
■ Select the recording schedule in 24-hr time format.
Action
Dene the actions to be performed by the Network Camera when a trigger is activated.
■ Trigger digital output for
seconds
Select this option to turn on the digital output to an external device when a trigger is activated. Specify
the length of the trigger interval in the text box.
■ Backup media if the network is disconnected
This requires an SD card and a Recording setting that designates a networked storage (NAS) as a
storage option. Select this checkbox to enable recording to the SD card when the network connection
is discontinued.
■ Move to preset location:
Select this option, the Network Camera will move to the preset location when a trigger is activated.
This function only applies to Mechanical PTZ controlled via RS485 device. If you do not enable
RS485 settings, this item will not appear in this column. Please refer to PTZ on page 78 for detailed