Filter
Top Products
D–36
D
Flash modes and functions
Flash photography with color filters
Balancing light from the flash using color filters
When using SB-900 with a camera equipped with fi lter detection
(such as D3, D700)
When a color filter is attached to the SB-900 while the camera’s white balance
is set to AUTO or FLASH, filter information is automatically transmitted to the
camera, and the camera’s optimum white balance is automatically adjusted to
give the correct color temperature.
When using SB-900 with a camera not equipped with fi lter
detection (such as D2 series, D300, D200, F6)
Set the camera’s white balance according to the filter in use.
White balance/exposure compensation value depends on
camera in use
■
•
■
•
■
*1 D3 camera with either firmware A or firmware B version 2.00 or later. (kF-10)
*2 Set the camera’s white balance and exposure compensation value.
For more details on the white balance, see your camera user’s manual.•
Camera
Filter
D3
*1
, D700
D2 series, D300, D200,
D100, D80, D70 series,
D60, D40 series, D1X,
D1H
D1, D50
FL-G1 Auto, Flash Not compatible Not compatible
FL-G2 Auto, Flash Not compatible Not compatible
TN-A1 Auto, Flash
Incandescent (fi ne tune +3),
+1.0 EV
*2
Not compatible
TN-A2 Auto, Flash
Direct sunlight (fi ne tune
+3), +0.3 EV
*2
Not compatible
Color fi lters
(RED, BLUE,
YELLOW,
AMBER)
Auto, Flash, Direct
sunlight
Auto, Flash, Direct sunlight
(+0.7
*2
EV with AMBER)
Auto, Flash, Direct
sunlight (+0.7
*2
EV with
AMBER)