Filter
Top Products
C–6
C
Operation
Basic operation
Adjusting the flash head
STEP
3
LCD indicator for flash head status
Hold down the flash head
tilting/rotating lock release
button to adjust the flash
head to the horizontal/
front position.
The flash head is locked at horizontal/
front and 90°.
•
Flash head is set at angle other than
horizontal/front. (Flash head is tilted up or
rotated to the right or left.)
Flash head is set at -7°. (Flash head is
tilted down.)
Flash head is set at horizontal/front.
•
•
•
Turn the SB-900 and the
camera body on.
To turn the SB-900 on, turn the
[Power ON-OFF] switch to [ON].
•
Turning the SB-900 and camera on
STEP
4
Angle of coverage is automatically set
according to lens in use.
•
ISO sensitivity is set automatically.•
When using i-TTL mode