Filter
Top Products
5UH-PRC002-EN
Features and
Benefits
High-Efficiency Propeller
Fan Unit Heaters
Trane high-efficiency propeller fan unit
heaters achieve annual fuel savings of
20 to 25 percent over conventional
gravity vented heaters.
Each unit features a factory-installed
flue vent fan and sealed flue collector
that controls combustion and excess
air during the on-cycle.
Heated air no longer escapes through
the draft diverter opening during the
off-cycle. Energy saving intermittent
pilot ignition reduces gas losses. The
pilot only operates when required.
Horizontal power venting, smaller
openings and single-walled vent pipe
reduce heat loss. Higher efficiencies
can reduce equipment and material
costs as well as installation time.
High Efficiency Indoor Duct Furnace
The high efficiency indoor gas duct
furnace complements our current
centrifugal and propeller fan lines.
All high efficiency lines were designed to
achieve fuel savings of up to
25 percent over conventional gravity
vented heaters.
Conventional gravity vented heaters lost
heated room air through the draft
diverter opening. The high efficiency line
features an integral flue vent fan and
sealed flue collector for improved
combustion. It reduces air requirements
and wind effects on the system’s
efficiency. Intermittent pilot ignition
reduces pilot gas losses and the flue vent
fan allows for horizontal venting through
side walls.
DUCT FURNACES ARE APPROVED FOR
BLOW-THRU APPLICATIONS ONLY.
High-Efficiency Centrifugal
Fan Unit Heaters
The high-efficiency centrifugal fan unit
heater keeps energy costs down. The
design advances achieve annual fuel
savings of 20 to 25 percent over
conventional gravity vented heaters.
In the past, these conventional gravity
vented heaters lost heated room air
through the draft diverter opening.
The high-efficiency centrifugal unit
features integral power venting (factory-
installed) and sealed flue collector for
optimum combustion.
It reduces wind effects on the system’s
efficiency. Intermittent pilot ignition
reduces pilot gas losses and the power
drafter allows for horizontal venting
through side walls. It all adds up to
higher efficiencies and lower installation
costs.