UH-PRC002-EN40
Table EP-1 — Motor Electrical Data — Centrifugal Fan
Current Full Load Amps*
Characteristics ¼hp 1/3hp ½hp ¾hp 1hp
115/60/1 5.0 5.9 7.2 11.0 14.0
230/60/1 2.5 3.3 3.9 5.5 7.0
208/60/3 NR NR 2.7 3.1 4.0
230/60/3 NR NR 2.4 2.8 3.6
460/60/3 NR NR 1.2 1.4 1.8
*FLA based on NEC ratings. All motors are 1725 rpm.
NR = Motor available, but not rated by NEC.
Table EP-2 — Motor Electrical Data — Horizontal Blower
Current Full Load Amps*
Characteristics ½hp ½hp ¾hp 1hp 1½hp 2hp 3hp
115/60/1 5.9 7.2 11.0 14.0 16.4 24.6 34.0
230/60/1 3.3 3.9 5.5 7.0 8.2 12.3 17.0
208/60/3 NR 2.7 3.1 4.0 4.9 6.4 9.2
230/60/3 NR 2.4 2.8 3.6 4.4 5.8 8.6
460/60/3 NR 1.2 1.4 1.8 2.2 2.9 4.3
Motor wt. (LB) 18 33 33 36 39 40 44
*FLA based on NEC ratings. All motors are 1,725 rpm.
NR = motor available, but not rated by NEC.
Electric
Power
Separated Combustion Units
Single-Stage Control
Electronic Modulating 4-20 mA/0-10 VDC
Input