TotalSecure Configuration Task List
30
SonicWALL TZ 180 TotalSecure
Configuring Client Alerts
If you want clients on your network to receive notifications on their desktop when a HTTP file
download is blocked by GAV, check the Enable Client Notification Alerts (desktop client
installation is required) box. You must install the client software included on the Resource CD for
your SonicWALL security appliance for the client to receive these notifications from SonicWALL
GAV.
If you want to suppress the sending of e-mail messages (SMTP) to clients from SonicWALL GAV
when a virus is detected in an e-mail or attachment, check the Disable SMTP Responses box.
Configuring a SonicWALL GAV Exclusion List
Any IP addresses listed in the exclusion list bypass virus scanning on their traffic.The Gateway AV
Exclusion List section provides the ability to define a range of IP addresses whose traffic will be
excluded from SonicWALL GAV scanning.
Caution Use caution when specifying exclusions to SonicWALL GAV protection.
To add an IP address range for exclusion, perform the following steps:
Step 1 Click the Enable Gateway AV Exclusion List checkbox to enable the exclusion list.
Step 2 Click the Add button. The Add GAV Range Entry window is displayed.
Step 3 Enter the IP address range in the IP Address From and IP Address To fields, then click OK.
You IP address range appears in the Gateway AV Exclusion List table. Click the edit icon in
the Configure column to change an entry or click the trashcan icon to delete an entry.
Step 4 Click OK to exit the Gateway AV Config View window.
Restricting File Transfers
The restrict transfer settings listed under the Configure Gateway AV Settings button in the
Gateway Anti-Virus Global Settings section, if enabled, prevent files with specific attributes from
being transferred.
The restrict transfer settings include:
