Filter
Top Products
Page 28 Connect and Configure Your Network
Connect and Configure Your Network
Your SonicWALL TZ 180 Wireless is equipped with a DHCP server. If you
enabled this feature in the Setup Wizard, your DHCP-enabled network clients
are automatically provisioned by the SonicWALL. Setting up your network is as
simple as:
1. Setting your clients to obtain their IP address automatically.
2. Connecting your wired clients (directly or using a hub/switch) to the
LAN ports (1-5) on your SonicWALL TZ 180 Wireless.
3. Connecting wireless clients to your new wireless SSID (the default SSID is
sonicwall). This step may require additional configuration if you enabled
WiFiSec or WPA2 security settings. Refer to the Wireless chapter in the
SonicOS Standard Administrator’s Guide
for detailed wireless setup
instructions.
4. Reading the SonicOS Standard Administrator’s Guide
to configure the
features and security services of your SonicWALL TZ 180 Wireless.
Congratulations! You have successfully completed set up of your SonicWALL
TZ 180 Wireless.
Local Wired Clients
Internet
TZ 180
wireless