Filter
Top Products
Page 22 Accessing the SonicOS Web Management Interface
Accessing the SonicOS Web Management Interface
Your SonicWALL TZ 180 Wireless employs the use of a Web-based
management interface for setup and configuration. Complete the following
steps to log into the management interface:
1. In a Web browser on the computer, navigate to: <http://192.168.168.168>
(the default IP address of the SonicWALL TZ 180 Wireless).
The Setup Wizard displays.
If the Setup Wizard does not display upon initial loading of the SonicWALL
TZ 180 Wireless management interface, refer to Unable to See the Setup
Wizard?, on page 23 for additional troubleshooting information.
2. Make a language selection and click the Next button to continue.
3. Follow the on-screen prompts to complete the Setup Wizard. Refer to the
information you recorded in Obtain Configuration Information, on page 8,
Obtain Internet Service Provider (ISP) Information, on page 9, to complete
this section.
4. Depending on the changes made during your setup configuration, the
SonicWALL may restart.
Note: Although the Setup Wizard guides you through basic wireless
connectivity setup, to enable advanced security options such
as WPA2 encryption, you must also run the Wireless Wizard.
For more information on securing your wireless network, refer
to the latest SonicOS Standard Administrator's Guide
, available
at <http://www.sonicwall.com/us/support.html>.