Filter
Top Products
Page 26 Verifying Management Interface Connectivity
Verifying Management Interface Connectivity
1. If your SonicWALL did not require a restart, skip to the Verifying WAN
(Internet) Connectivity section, on page 27. Otherwise, continue with
step 2.
2. Wait for the SonicWALL TZ 180 Wireless to reboot. When the Test LED
is no longer lit, the SonicWALL TZ 180 Wireless is ready for login.
3. If the login page does not display after reboot, open a Web browser on the
computer and manually navigate to the LAN IP address of your SonicWALL
TZ 180 Wireless.
4. Using your new username and password, log into the appliance.
If the System > Security Dashboard page (shown below) displays, you have
correctly configured the SonicWALL TZ 180 Wireless to work with the computer
on your LAN. Complete the next section to verify WAN (Internet) connectivity.