Filter
Top Products
User Manual Chapter 3 Setting Up and Putting Away the System 35
To Connect the XLG3 System to a Wireless Network
1. At the base unit, insert a wireless PC card into either PC card slot .
Use only a NETGEAR card for this purpose: manufacturer part number WG511T
(GE Inspection Technologies part number XLG3A80211CARD).
2. Press . Select Setup Menu > Communications > IP Address > Automatic.
3. A checkmark appears next to Automatic.
4. Press . Select Setup Menu > Communications > Wireless Configuration.
The WiFi Configurations window opens.
5. Select Detect.
If the system detects any network access points, they appear now, listed under the
Auto Detect tab
If the system is connected to a network using both an Ethernet connection and a
wireless connection, the system will use the Ethernet connection by default.