Filter
Top Products
30 Chapter 3 Setting Up and Putting Away the System GE Inspection Technologies XLG3 VideoProbe System
Changing the Probe
To Remove a Probe
1. Shut down the probe.
a. While viewing a live or frozen image, press .
b. Select Probe Shut Down.
2. Open the probe latch. The probe pops out slightly.
3. Gently slide the probe out of the handset.
To Install a Probe
1. Open the probe latch.
2. Slide the probe into the handset.
3. Close the latch.
Latch
(partially open)