Filter
Top Products
Eng-99
4-5) ZOOM MODE DISPLAY
When users want to see a zoomed image of a specific area of the display, press the ZOOM
KEY in the front to display zoom selection area. Select zoom target area by using
▲/▼
KEY,
and press the ENTER SWITCH, then, the selected area will be displayed at full single mode
with zoomed area doubled.In the zoom function operation in SINGLE DISPLAY MODE
(CH2), the operation will be carried out as shown in figure below. (You can select nine
Zoom areas on the screen in SINGLE DISPLAY MODE are nine.)
CH2
CH2
➯
➯
06/01/03 13:14:00
➯
CH2
CH2 SINGLE DISPLAY
ZOOM area is activated.
Press ZOOM
KEY
The selected area will be doubled
and at FULL DISPLAY.
Press
▲/▼
KEY and move to
desired location
Press
ENTER
key
06/01/03 13:14:00 06/01/03 13:14:00
06/01/03 13:14:00