Filter
Top Products
Eng-36
Chapter 3: Setting each item function in the
SETUP MENU
Pressing the FRONT PANEL MENU button allows users to enter SETUP MENU and see the
following menu OSD box. Setting method of each SETUP MENU function and operation is as follows.
3-1) ADJUST MENU function and setting method
•
Function: Allows adjustment of the display status
•
Setting method: Move to #1. ADJUST MENU by using▲/▼ KEY and press the ENTER
SWITCH to display the OSD as shown in the figure below. (The figure shows the initial setting
status.)
Move to a target item by using ▲/▼ KEY.
Enter the item by pressing the
œœ
ENTER
√√
SWITCH.
At this time, set a target value by using
œœ
/
√√
KEY.
You can move to another item by using▲/▼ KEY after setting the target value.
(1) CONTRAST : Adjusts the contrast of the picture.
(2) BRIGHT : Adjusts screen luminance.
(3) COLOR : Adjusts color intensity.
(4) TINT : Works with the color adjustment to create the correct color imaging.
(5) SHARPNESS : Adjusts the detail of the image.
06/01/03 13:14:00
1. ADJUST
2. DATE/TIME
3. DWELL TIME
4. DISPLAY
5. TITLE
6. ALARM
7. NETWORK SETUP
8. VIEW EVENT LOG
06/01/03 13:14:00
CONTRAST 50
BRIGHT 50
COLOR 50
SHARPNESS 50
TINT 50
SETUP MENU
ADJUST SETTING
VE_1.07