Filter
Top Products
Eng-42
5) After setting, move to the main screen by using the MENU BUTTON.
6) Set values will be stored as shown below. It takes 2 or 3 seconds.
On completion of setting to Static IP(Fixed IP)setup, the screen, [S] is displayed.
If the network connection is cancelled or cut, [S] starts blinking.
7) Open your Internet Explorer web browser.
Using a Static (fixed) IP, You may also connect remotely by typing in the IP address of
the SMO-211QN/SMO-150QN, Such as
http://192.168.1.200
* Note : HTTP Port
Set the port to be used when connection to SMO-211QN/SMO-150QN in Internet Explorer
and receive the necessary files for image transmission.
Necessary files for the image transmission.
The port setting is used for various network configuration or a particular port etc.
CAUTION
A port number is reserved for TCP port and HTTP port setting.
Default values should not be changed.
However, if the IP Router is used in a network environment, input proper values with
reference to the IP Router manual.
If the SMO-211QN/SMO-150QN is using a Router, you may also connect remotely by
typing In the WAN
IP Address of the Router and the HTTP port assigned to the SMO-211QN/SMO-150QN.
(here you must type in the port address even if it is the default “80”), such as
http://192.168.1.200
:80
06/01/03 13:14:00
NETWORK SETTING
[S] 06/01/01 13:14:00
CAM1