Filter
Top Products
Eng-32
Chapter 2: MONITOR FRONT PANEL KEY
Function and Operation
Front Panel
2-1) TALK KEY
The TALK KEY allows voice signal tobe transmitted to an intended camera with built-in MIC on the
front of the monitor. For this function, select a target camera with the ▲/▼ key on the FRONT PANEL,
and press AUD/SP SEL KEY. At this time, if a voice signal is generated through the MIC with the
TALK KEY pressed, the signal will be transmitted to the camera.
2-2) AUD/SP SEL KEY
AUD/SP SEL KEY allows users to select aStandad(SOC-C120) camera to send/receive voice signals
with the monitor in the QUAD DISPLAY MODE(see page 96 for discription). In the QUAD DISPLAY
MODE, select target camera by using ▲/▼ , and press AUD/SP SEL KEY. Then “S” OSD will be
displayed on the selected screen. If you want to send/receive voice signals with another camera,
use▲/▼ key again to select the camera, and press AUD/SEL KEY. Then, “S” OSD will be displayed
and you can send/receive voice signals with the monitor.
2-3) VOL+/VOL- KEY
VOL+ : Increase sound volume from the monitor.
VOL- : Decrease sound volume from the monitor.