Filter
Top Products
Eng-76
3. Network Ports Configuration
It sets the HTTP Port number to use when the SMO-211QN/SMO-150QN Server communi-
cates with a Client PC.
The present SMO-211QN/SMO-150QN Server uses HTTP Port (80).
- HTTP Port
1) This is the port the Client PC uses to connect to the web page of the SMO-211QN/SMO-
150QN Server. Depending on the environment of the network, its value may vary.
2) The fault values is 80 and can be assigned up to 65535 maximum.
* If you change the value of the HTTP Port, you should type in the new one with the address
of the SMO-211QN/SMO-150QN Server in the address window of the web browser.
(Ex. If the IP address of the SMO-211QN/SMO-150QN Server is 192.168.1.100 and the
HTTP Port : 8080, http://192.168.1.100:8080
.)
3) Click Apply button to apply the present setting.
CAUTION
Set the port to be used when connecting to SMO-211QN/SMO-150QN in Internet
Explorer.
The port setting is used for various network configurations, for example when
connecting to a network with firewalls.