Filter
Top Products
77
A Variety of Shooting Techniques/Playback
Inserting the Date into a Still Image
(DATE IMPRINT)
You can insert the date (YY/MM/DD) or the date and time (YY/MM/
DD hh:mm) at the lower right of a still image.
1. Turn the mode dial to 5 or A/M.
2. Press the M button.
The Shooting Setting menu appears.
3. Press the #$ buttons to switch between displays as
required.
4. Press the " button to select [DATE IMPRINT] and then
press the O or $ button.
5.
Press the
!"
buttons to select the
desired setting.
6. Press the O or # button.
The Date Imprint settings are completed.
7. If you pressed the # button in
step 6, press also the M
button.
The shooting setting menu disappears
and the LCD monitor displays .
This setting will be used for shooting until
you change it.
Note
• If the date and time have not been set, DATE IMPRINT cannot be used. First make the
date and time settings (P.120).
• DATE IMPRINT cannot be used with movies.
• A thumbnail image is not displayed with a date.