Filter
Top Products
137
Installing Software
Note
By default, the WIA driver is installed in the following location:
3. Select [RICOH Gate La], check
[Always use this program for this
action] check box, and then click
[OK].
To load images from the camera with assistance from the Windows XP Scanner
and Camera Wizard, select [Scanner and Camera Wizard].
Leaving the [Always use this program for this action] check box unchecked will
cause the [Caplio GX8] screen to be displayed each time you transfer images
from the camera, thereby allowing you to choose whether to use RICOH Gate
La or the Scanner and Camera Wizard for image transfers.
If your PC is installed with Windows XP Service Pack2 and a warning message
is displayed, see P.157.
Disconnecting the Camera from Your Computer:
1. Turn your camera off by pressing the power button.
2. Unplug the USB cable.
Note
• If connection fails, delete the software (see P.142) and install it again.
• It is recommended that you use the AC Adapter (sold separately) when you are
downloading images from your camera.
My Computer
Local Disk
Program Files
Caplio Software
WIA Driver