Filter
Top Products
23
Quick Guide
3. Open the power (DC input) cable
cover and take the cable out.
4. Close the battery/card cover and
slide it back into place.
5. Plug the power cord into an
outlet.
Removing the AC Adapter
If you have already used this camera, make sure it is turned off
before removing the AC Adapter Battery.
1. Unplug the power plug from the outlet.
2. Open the battery/card cover.
The cover slides open in two steps.
First slide the cover toward the face of the camera, then lift it to expose
the battery compartment.
3. Remove the battery.
4. Close the battery/card cover and slide it back into place.
Caution
• Be sure to firmly attach cables and plug in cords.
• When you are not using the camera, unplug the AC Adapter from the camera and the
power outlet.
• While in use, if you detach the AC Adapter or unplug it from the outlet, data may be lost.
• When using the AC Adapter, the battery level indication may not reach the full area.