Filter
Top Products
115
Changing Camera Settings
Changing the Beep Sound Setting
(BEEP SOUND)
During operation, the camera generates four types of sounds: start
sound, shutter release sound, focus sound, and beep sound.
To change the beep sound settings, follow the steps below:
1. Turn the Mode Dial to 1.
2. Press the " button to select
[BEEP SOUND].
3. Press the #$ buttons to select the
desired setting.
This setting will be used until you change
it.
Start sound : Sound when the camera power is turned on.
Shutter release sound : Sound when the shutter button is pressed.
Focus sound : When the focus is set, the camera generates the focus sound.
Beep Sound : If an impossible operation is attempted, the camera generates the beep sound.
Possible Settings
SHUTTER (Shutter and beep sounds only)
ON (all sounds on) *Initial setting at purchase
OFF (all sounds off)