Filter
Top Products
45
Quick Guide
Playing Back
Checking the image you just took
(Quick Review)
You can view the image you just took on the LCD monitor. If you
are not pleased with the way the photo came out, you can erase it
then and there.
1. While still in the Still Image Mode,
press the Q button.
The last image you took is displayed on
the LCD monitor.
Press Q again and the camera is ready to
shoot.
Note
• Once the power is turned off, the image you took cannot be displayed in the still image
mode even if you press the Q button.
• If you use Quick Review to view the image taken in Text mode (see P.43), the displayed
image may have slightly lower quality than the recorded one.
In Quick Review
Q Button Returns to Shooting Mode.
8 Button Enlarges the displayed still image. You can move around on the displayed
image by pressing the !"#$ buttons.
9 Button Reduces the displayed still image enlarged by pressing the 8 button.
O Button Displays the still image at the maximum available ratio or returns it to its
original size.
D Button Deletes the currently displayed file. When the D button is pressed, a warning
message about deleting the file appears. Select [DELETE] and press the O
button.
Q