Filter
Top Products
136
Connecting the Camera to Your Computer
After installing the software on your computer, connect your camera
to it.
1. Make sure the camera power is off.
2. Connect the USB cable to the
USB port of your computer.
3. Connect the USB cable to the
USB terminal of your camera.
Your camera turns on.
For Windows XP
The first time you connect your camera to the computer using a USB
cable, the [Found New Hardware Wizard] screen will appear.
1. Select [Install the software
automatically (Recommended)].
2. Insert the Caplio Software CD-ROM into the CD-ROM drive
on your computer.
Installation of the WIA Driver automatically starts. If the CD-ROM is
already on your computer when the [Found New Hardware Wizard]
window is displayed, simply click [Next] to start installation.