Filter
Top Products
UltraGlow G36D Zero Clearance Direct Vent Gas Fireplace
26
INSTALLATION
Log indentation
Photo shows rear grate tab. Log
02-51 was removed to show the posi-
tioning of Log 02-52.
Rear
Grate Tab
Rear Bracket
7) Place the bottom left front edge of Log 02-55 against the rear bracket
on the burner tray and rest the log on the cutout on Log 02-53.
Cutouts
8) Place Log 02-52 between Logs 02-51 and 02-75 and on the indenta-
tion on Log 02-54. The bottom right end sits behind the rear grate
tab.
Front Brackets
Notch
9) Sit Log 02-50 on the front left side of the burner. Push the back of
the log against the 2 front brackets with the notch on the bottom of
the log fi tting into the fi rst grate tab.
5th Grate Tab
6) Position Log 02-54 across the cutouts in Logs 02-51 and 02-53. The
notch in the bottom right end fi tting against the 5th grate tab.
02-54
02-51
02-75
02-55
02-53
02-51
02-51
02-54
02-52
02-75
02-54
02-52
02-53
02-50
02-53
02-55
02-50
02-54
02-53