5100-I ACT WOOD INSERT
R
438-0380E
April 21, 2010
10
Troubleshooting
With proper installation, operation, and maintenance your appliance
provide years of trouble-free service. If you do experience a problem,
Start Fire Problems Possible Cause Solution
spillage
Burns too slowly
wood for air movement.
assembly section).
Open window below the appliance towards the
wind.
Wood condition is too wet, too
large
section).
Bed of coals not established
before adding wood
or leaves in termination cap
Down draft or negative pressure
Competition with exhaust devices
Do not use exhaust fans during start-up (refer to
negative pressure section).
Open window below the appliance towards the
wind.
Extremely dry or soft wood
(refer to wood fuel section).
Overdrafting
height creates overdrafting.