5100-I ACT WOOD INSERT
April 21, 2010
R
438-0380E
Figure 22.1
Figure 22.2
Option One
See Fig-
ures 36.1 and 36.2 on page 36 for details for removing the
NOTE:
Bend upwards 90 degrees as show in Figure 22.2
2 pre-drilled holes on flue
collar under outer skin
(access through firebox)
Attach liner with 2 tabs
a.
assemble the trim pieces. Lay the trim face down.
b. Attach the 2 side trim pieces to the top trim at each
Figure 22.1.
NOTE:
If you have a mantel, you may need to install the
trim on your panels before you push the insert into the
2. Assembling Trim
View of “L” bracket installed
D. Securing Liner to Flue Collar