Filter
Top Products
22 Pelco Manual C1043M-A (2/96)
[F8] PAGE BACK/PAGE FORWARD TOGGLE
This option allows you to look back one page of text
on your monitor to verify data. By using this key
you will automatically force the unit into large screen
mode. Pressing [F8] again will bring back the cur-
rent page of text. The active page will show the cur-
sor at the bottom of screen.
[F9] CAMERA SELECT
This function selects a video input from the ports
labeled “VIDEO IN” on the ICI3000P, a selected
input from the ICI3008/ICI3016 camera list or no
video which is defined as internal sync (see Section
4.4 and 4.8.9).
[F10] REVERSE VIDEO ON/OFF
This feature changes the visual characteristics of the
data displayed by placing a black background around
the video characters (see Section 4.7).
[F11] SCREEN DATA DUMP
This feature will send all data currently displayed on
the monitor and any data following to the printer.
No data will be displayed on the monitor until the
[F11] key is pressed again. In order to activate the
data dump, press [F11] followed by the desired
screen (1 or 2).
[F12] AUTO CAMERA SEARCH ON/OFF
Monitors camera system’s sync generation. If moni-
toring camera loses power or is disconnected, the
system will switch to the next camera for synchroni-
zation. If active video is not detected, the system will
switch to “internal sync” (see Section 4.6).