Filter
Top Products
Pelco Manual C1043M-A (2/96) 11
4.6 AUTO CAMERA SEARCH ON/OFF
When enabled, this feature monitors your camera
system’s sync generation. If your monitoring camera
loses power or is disconnected, the system will auto-
matically switch to the next camera for synchroniza-
tion. If an active video is not detected, the system will
automatically switch to “internal sync”. To enable the
Auto Camera Search feature, press [6]. Press [6] again
to turn off this feature.
4.6.1 Auto Camera Search On/Off
Using Hot Key F12
From the monitoring mode:
• Press [F12] to activate Auto Camera Search.
• Press [F12] again to deactivate Auto Camera Search.
4.7 REVERSE VIDEO ON/OFF
This feature changes the visual characteristics of the data
displayed by placing a black background around the video
characters.
• To enable the Reverse Video, press [7].
• To disable this feature press [7] again.
4.7.1 Reverse Video On/Off Using
Hot Key F10
From the monitoring mode:
1. Press [F10] to activate Reverse Video.
2. Press [F10] again to deactivate reverse video.
4.8 SYSTEM PROGRAM
This menu is used for programming text displays;
communication and printer parameters; clock features;
camera selections and alarm dwell time.
To enter the System Menu, Press [8]. The following
menu will be displayed:
SYSTEM MENU
1. # Chars./line
2. # Lines for small scrn 1 or 2
3. Small scrn position 1 or 2
4. Large scrn position 1 or 2
5. Alarm dwell time
6. Channel parms
7. Printer parms
8. Set clock
9. Ext. cam. select
0. Shadow List
4.8.1 Number of Characters Per Line
Selecting 1 from the SYSTEM MENU enables you to
select the number of characters per line displayed on the
monitor.
Enter a number from 1-80 best suiting your application.
To access this menu, press [1]. The following prompt
will be displayed: Screen 1 or 2?
Enter the Screen number you wish to adjust. The following
prompt will be displayed:
# of characters = 40
Enter # of characters/line 1-80
• Enter the number of characters to be displayed.
• Press ENTER.
NOTE: The ICI3000P can only display 80 total
characters per line. Selecting 50 characters for
Screen 1 only allows 30 characters to be
displayed on Screen 2.