Filter
Top Products
10 Pelco Manual C1043M-A (2/96)
• Press [3] to select internal synchronization (no
video).
•Pressing F9 will enable you to select an external
camera from PELCO’s ICI3008/ICI3016 Inter-
Check switchers.
After pressing F9, the following prompt will be displayed:
Enter select #
Select camera number that corresponds to the
ICI3008/ICI3016 switcher.
4.4.1 Camera Select Using Hot
Key F9
From the monitoring mode:
1. Press [F9]
2. Select appropriate Video Input mode
1 = Video Input 1
2 = Video Input 2
3 = Internal Sync
F9 = Shadow List line item (To select an external
camera from ICI3008/ICI3016 Inter-Check switch-
ers.)
4.5 SCREEN PRINT ON/OFF
This selection enables auxiliary serial printer port 1 on
the ICI3000P. To access this menu, press [5]. The fol-
lowing prompt will be displayed:
Screen 1 or 2?
Enter the screen number you wish to print.
4.5.1 Screen Print On/Off Using
Hot Key F4
From the monitoring mode:
1. Press [F4]
2. Select screen number to be printed
[1] = Screen 1
[2] = Screen 2
4.2.1 Operator Selection Using
the Hot Key F2
To select a specific operator for monitoring while in the
monitoring mode:
1. Press [F2]
2. Select appropriate Screen # (no prompt is displayed):
Pressing [1] selects Screen 1
Pressing [2] selects Screen 2
3. Select operator number for monitoring.
4. Press [ENTER].
4.3 EXCEPTIONS ON/OFF
This function tells the Inter-Check unit whether or not
you want it to search for specific transactions that may
indicate fraudulent activity, known as “Exceptions”.
This works as a toggle switch.
•Press the [3] key to turn on the Exceptions. The
prompt, Exceptions on! will be displayed at the
top of the monitor.
•Pressing the [3] key again will turn off the Excep-
tions. The prompt, Exceptions off! will be dis-
played at the top of the monitor.
4.3.1 Exceptions On/Off Using the Hot
Key F3
To toggle the Exceptions on/off from the monitoring
mode, press [F3].
4.4 CAMERA SELECT
This function is used to select a video input from the
ports labeled “VIDEO IN” on the ICI3000P, a selected
input from the ICI3008/ICI3016 camera list or no video
which is defined as internal sync.
To access this menu, press [4]. The following prompt
will be displayed: Camera 1, 2, 3 internal, F9 exter-
nal
•Press [1] to select “VIDEO IN 1” on the back of the
ICI3000P.
•Press [2] to select “VIDEO IN 2” on the back of the
ICI3000P.