Filter
Top Products
- 49 -
Video
Problem Check points
No pictures are
displayed or the pictures
are disturbed.
≥ Check if the unit is correctly connected with other
devices.
≥ If your system is configured in such a way that a
displayed image is automatically switched in conjunction
with your camera selection, select the correct camera.
≥ Check if [Format], [Down CONV. Mode], and [System
Frequency] are set correctly. (l 34, 35)
The picture is flipped
vertically.
≥ Turn the middle ring portion by 180° so that the internal
stereo microphones are facing up.
Multiple color bands
(color bars) are
displayed.
≥ Switch to the camera picture. (l 5, 43)
The menu screen is
displayed.
≥ To close the camera menu, press the MENU button of the
wireless remote controller.
≥ Press and hold the CAMERA OSD button of the controller
for 2 seconds to exit the camera menu.
Something is wrong with
the coloring of the
pictures.
≥ Set the white balance to ATW (auto). If colors do not
appear correct even in ATW mode, perform the White
Balance Setting. (l 15)
When fine lines or
cyclical patterns are
shot, flickering is seen
or coloring is added to
them.
≥ This phenomenon occurs because the pixels are
arranged systematically on each image sensor. It is
noticeable when the spatial frequency of a subject and
the pixel pitch are brought into proximity so change the
camera angle or take other such action.