Filter
Top Products
- 39 -
Network screen
You can configure the network settings for the unit.
≥ After changing settings, click [Set].
You can set whether to use the DHCP function. To prevent computers that do not use DHCP
function and other network cameras from using the same IP address, set the DHCP server.
For details on the server settings, consult your network administrator.
Input the unit’s IP address here when the DHCP function is not going to be used. Input an
address that will not duplicate an existing IP address which has been set for a personal
computer or another network camera.
≥ This function’s default setting is [192.168.0.10].
≥ Multiple IP addresses cannot be used even when the DHCP function is used.
For details on the DHCP server settings, consult your network administrator.
[DHCP]
[Off]/[On]
[IP address]