Filter
Top Products
- 26 -
You can save desired settings to the preset memory and call them when needed. (Up to 9)
≥ You can save the following settings:
jZoom level
jContrast
jPinP display/non-display
jPinP retrieval position
jPinP display zoom level
jPinP display position
jPan/tilt positions
jWhite balance
jControl mode
jDigital zoom enablement/disablement
jAuto mode/manual mode for adjusting
brightness
jBrightness adjustment value
Operating Using the Web setting screen
1 Open the Live screen.
2 Select one of the numbers [1] to
[9] from the [Preset] pull-down
menu.
3 Click [Set].
≥ The current settings are saved in the preset memory. (When the selected number is
already taken, the current settings replace the old ones.)
To call the settings in the preset memory
Select one of the numbers [1] to [9], and then click [Move].
≥ If you select [Home] and then click [Move] while the control mode is set to the Main screen,
the zoom level changes to k1.
≥ If you select [Home] and then click [Move] while the control mode is set to PinP, the PinP
retrieval position moves to the center of the screen, and the zoom level changes to k1.
≥ You can also perform the operations from the Setup screen. (l 33)
Using the Preset Memory