Filter
Top Products
- 44 -
Setting Using the Camera Menu
≥ The following items can only be set from the camera menu:
You can set whether to show the menu screen and the status display of the White Balance
Setting when the unit receives a tally light-up signal.
You can update the firmware of the unit.
≥ After contacting the store of purchase, save the latest firmware on to a microSD card
(always check the precautions of the store of purchase before following any
instructions).
1 Insert a microSD card containing an update file into the card insertion portion.
2 Select the menu.
≥ Follow the on-screen instructions to update.
≥ Do not turn off the unit while it is updating.
≥ Do not perform any operations while it is updating.
You can set the resolution of the camera image displayed on the web setting screen.
≥ When displaying camera images of this unit in the web setting screen of other devices,
camera images in the web setting screen of this unit will be displayed at 320k180/10fps.
[OSD OFF WITH TALLY]
[ON]/[OFF]
[SYSTEM] # [OSD OFF WITH TALLY] # desired setting
[ON]: Hides the display.
[OFF]: Shows the display.
[UPDATE]
[MAINTENANCE] # [UPDATE]
[IMAGE RESOLUTION]
[640k360]/[320k180]
[SYSTEM] # [IMAGE RESOLUTION] # desired setting