Filter
Top Products
- 22 -
Switching the Control Mode
You can switch the control mode to main screen or PinP while a PinP image is displayed.
Main screen control mode:
You can operate the main screen (zoom, pan/tilt).
PinP control mode:
You can change the PinP retrieval position, and perform zoom operations for a PinP image.
(l 23, 24)
≥ When the control mode is set to PinP, the PinP retrieval
frame A is displayed on the HDMI output monitor, and the
zoom level of the main screen is set to k1.
1 Open the Live screen.
2 Select [Main] or [PinP] of
[Control].
Press the OPT-OFF button.
≥ The control mode changes each time you press the button.
≥ If you change the control mode from PinP to the Main screen or hide the PinP display, the
zoom magnification and pan/tilt position return to their original states.
≥ The PinP retrieval frame does not appear while the camera menu is displayed.
Operating Using the Web setting screen
Main: Sets the control mode to the Main screen.
PinP: Sets the control mode to PinP.
Operating using the wireless remote controller