Filter
Top Products
- 23 -
Changing the PinP Retrieval Position
≥ Set the control mode to PinP. (l 22)
1 Open the Live screen.
2 Click or drag the control pad/buttons.
≥ The operation method is the same as the pan/tilt operations.
(l 12)
≥ The PinP retrieval frame moves and the retrieval position
changes.
≥ When [Home] is selected for [Preset] and [Move] is clicked,
the PinP retrieval position moves to the center of the screen,
and the PinP display zoom level is set to k1.
Press the 3/4/2/1 button.
≥ The operation method is the same as for pan/tilt operations.
(l 13)
≥ To increase the movement speed, press the FAST button. To
decrease the movement speed, press the SLOW button.
≥ The PinP retrieval frame moves and the retrieval position
changes.
≥ If you press and hold the HOME button for 2 seconds, the PinP
retrieval position moves to the center of the screen and the
PinP display zoom level changes to k1.
≥ The PinP retrieval position can be changed within a screen with an aspect ratio of 16:9
even when [Format] is set to [480p (576p)]*and [Down CONV. Mode] is set to [SideCut].
* When [System Frequency] is [59.94Hz(NTSC)], you can select [480p], and when it is set to
[50Hz(PAL)], you can select [576p].
Operating Using the Web setting screen
Operating using the wireless remote controller