Filter
Top Products
21
Unipolar Output Current
Module OM5-IVI
Input Voltage Range ±5V or 0V to +5V
Input Current Range (–05) 0 to 20mA
Input Voltage Maximum ±36V (no damage)
Input Current, Maximum (–05) 75mA (no damage)
Input Resistance 50MΩ
Input Resistance (–05) 20Ω
Output Current Range 0 to 20mA or 4 to 20mA
Over Range Capability 10%
Output Compliance Voltage
(Open Circuit) 22VDC
Load Resistance Range 0 to 650Ω
(0 to 750Ω for Power Supply Voltage
greater than 4.95VDC)
Output I Under Fault, max 26mA
Output Protection
Continuous 240Vrms max
Transient ANSI/IEEE C37.90.1-1989
CMV, Output to Input
Continuous 1500Vrms max
Transient ANSI/IEEE C37.90.1-1989
CMR (50Hz or 60Hz) 110dB
NMR (–3dB at 400 Hz) 40dB per Decade above 400Hz
Accuracy ±0.05% Span
Nonlinearity ±0.02% Span
Stability
Zero ±0.5µA/°C
Span ±20ppm/°C
Noise
Output Ripple, 1kHz bandwidth 10µAp-p
Bandwidth, –3dB 400Hz
Rise Time, 10 to 90% Span 0.75ms
Sample and Hold
Output Droop Rate 40µA/s
Acquisition Time 50µs
Track-and-Hold Enable Control
Max Logic “0” +0.8V
Min Logic “1” +2.4V
Max Logic “1” +36V
Input Current, “0” 0.5µA
Power Supply Voltage +5VDC ±5%
Power Supply Current 170mA
Power Supply Sensitivity ±0.5µA/% typ
Mechanical Dimensions 2.28" x 2.26" x 0.6" (58mm x 57mm x 15mm)
Environmental
Operating Temp. Range –40°C to +85°C
Storage Temp. Range –40°C to +85°C
Relative Humidity 0 to 95% Noncondensing
Emissions EN50081-1, ISM Group 1, Class A (Radiated, Conducted)
Immunity EN50082-1, ISM Group 1, Class A (ESD, RF, EFT)
* same specification
MODEL INPUT RANGE OUTPUT RANGE BANDWIDTH
OM5-IVI-B4-C 0V to +5V 4mA to 20mA 400Hz
OM5-IVI-A4-C –5V to +5V 4mA to 20mA 400Hz
OM5-IVI-B0-C 0V to +5V 0mA to 20mA 400Hz
OM5-IVI-A0-C –5V to +5V 0mA to 20mA 400Hz
SPECIFICATIONS Typical at T
A
= +25°C and +5V power.
ORDERING INFORMATION