Filter
Top Products
33
Module OM5-AV
Input Voltage Range ±5V, 0 to +5V, ±10V, 0 to +10V
Input Voltage Maximum ±36V (no damage)
Input Resistance 50MΩ
Output Voltage Range ±5V, 0 to +5V, ±10V, 0 to +10V
Over Range Capability 5% @ 10V output
Output Drive 50mA max
Output Resistance 0.5Ω
Output I Under Fault, Max 75mA
Output Protection
Transient ANSI/IEEE C37.90.1-1989
CMV, Output to Input
Continuous 1500Vrms max
Transient ANSI/IEEE C37.90.1-1989
CMR (50 or 60Hz) 110dB
NMR (–3dB at 400Hz) 100dB per Decade above 400Hz
Accuracy
(1)
±0.05% span (0-5mA load)
Nonlinearity ±0.02% span
Stability
Zero ±25ppm/°C
Span ±20ppm/°C
Noise
Output Ripple, 1kHz bandwidth 2mVp-p
Bandwidth, -3dB 400Hz
Sample and Hold
Output Droop Rate 0.2% Span/s
Acquisition Time 50µs
Track-and-Hold Enable Control
Max Logic “0” +0.8V
Min Logic “1” +2.4V
Max Logic “1” +36V
Input Current, “0” 0.5µA
Power Supply Voltage +5VDC ±5%
Power Supply Current 350mA Full load, 135mA No load
Power Supply Sensitivity ±12.5ppm/%
Mechanical Dimensions 2.28" x 2.26" x 0.60" (58mm x 57mm x 15mm)
Environmental
Operating Temp. Range -40°C to +85°C
Storage Temp. Range -40°C to +85°C
Relative Humidity 0 to 95% noncondensing
RFI Susceptibility ±0.5% Span error at 400MHz, 5W, 3ft
Emissions EN50081-1, ISM Group 1, Class A (Radiated, Conducted)
Immunity EN50082-1, ISM Group 1, Class A (ESD, RF, EFT)
SPECIFICATIONS Typical at TA= +25C and +5V Power
ORDERING INFORMATION
MODEL INPUT RANGE OUTPUT RANGE
OM5-AV-1-C 0V to +5V -5V to +5V
OM5-AV-2-C -5V to +5V -5V to +5V
OM5-AV-3-C -5V to +5V 0V to +5V
OM5-AV-4-C 0V to +10V -10V to +10V
OM5-AV-5-C -10V to +10V -10V to +10V
OM5-AV-6-C -10V to +10V 0V to +10V
OM5-AV-7-C -5V to +5V -10V to +10V
NOTES: (1) Includes nonlinearity, hysteresis and repeatability.