Filter
Top Products
10-40
Page 50
2008-12-03
1.4.2 Dismantle and install the UV lamp (option)
1. Pull the retaining clip out to release the
UV light plug.
2. Carefully lift the plug and pull the UV
lamp out of the housing.
3. Remove glass tube to the top.
4. Clean glass tube outside and inside
with a lint-free and soft cloth.
The installation of the UV lamp follows the reverse dismantling order.
CAUTION! When installing the UV lamp, make sure to hold the lamp
until it is completely inserted. Under no circumstances let the lamp fall
inside the holder, since this could damage the lamp.