Filter
Top Products
10-10
Page 18
2008-12-03
1. INSTALLATION
1.1 IMPORTANT NOTES ON THE MOUNTING AND INSTALLATION WORK
Qualification of personnel
All mounting and installation work must be carried out only by well qualified personnel
authorized by the owner. It is the owner’s responsibility to verify proper qualification of
the personnel.
General note
Strictly observe and comply with all information given in the present installation and
operating instructions regarding the mounting of the unit and the installation of water
and electricity.
Observe and comply with all local regulations dealing with water and electrical
installations.
Safety
The electrical installation for the unit models MHB Flow, MHTC Flow, MHB Reflow,
MHTC Reflow requires the removal of the control unit cover. Please note the following:
Danger of electrical shock! You may get in touch with live parts
when the control unit is open. The control unit must be connected
to the mains only after all mounting and installation work has been
completed and the control unit cover has been relocated properly.
The electronic components inside the control unit are very
sensitive to electrostatic discharge. When the unit is open for
installation work, appropriate measures must be taken to protect
these components against damage caused by electrostatic
discharge (ESD protection).