Filter
Top Products
10-10
Page 22
2008-12-03
Figure 3. Mounting Process – Step 3
Hint: With close space conditions we recommend to install the EPDM sealing profile to the vertical
supports before installing the supports. Please refer to step 7 for more information.
Carefully mount the left “D” and the right vertical support “E” onto the threaded bolts of the
water tank, then fix each support with four 1/4 UNC nuts and washers (do not overtighten the nuts).
Important! Before tightening the nuts make sure the holes of the vertical supports seat solidly
on the sheet metal of the water tub and do not stuck on the collar of the threaded bolt!