Filter
Top Products
10-40
Page 49
2008-12-03
1.4 DISMANTLING AND INSTALLATION WORKS
1.4.1 Dismantle and install the mist eliminator and humidification boxes.
1. Undo the hose clamps, then pull off the
hoses from the connections on the spray
bar caps.
2. Lift the spray bar caps on the water
connection side and remove them to the
front.
3. Starting from the top remove the mist
eliminator boxes (push box upwards and
remove it to the front).
4. Release the fixing clip in the middle of
the mounting bracket by pressing slightly
on the vertical support, then carefully
push the mounting bracket upwards and
remove it. Repeat this step for all
mounting brackets.
5. Starting from the top remove the
humidification boxes (push box upwards
and remove it to the front).
The installation of the cleaned or the new humidification boxes/mist eliminator boxes
follows the reverse dismantling order.