Filter
Top Products
2
WI1370 XP-400 Installation Instructions
General Information
The NAPCO EXPRESS XP-400 control panel
provides up to 4 hardwired/wireless zones. Up to four
4-digit user codes can be programmed. Ambush,
when selected, uses User 4 code as an Ambush
code.
The XP-400 is wireless ready. When used with a
GEM-RECV-XP8 receiver, the control panel can
support up to 4 wireless zones and 2 Keyfobs.
The RPXP4GT keypad provides complete control of
the XP-400 control panel. Information on system
status, bypassed zones, system troubles etc. can be
viewed at the keypad.
The control panel can be easily and quickly
programmed from the keypad. The panel can also be
locally or remotely downloaded using PCD3000
software and a PCI 2000/3000 interface or PCL2000A
local Download cable. See Downloading Section (pg.
5) for more information.
XP-400 Features
Control Panel
•
4 Zones
•
3 Keypad Panics
•
Wireless Ready
•
Bell Supervision
•
Line Cut Detection
•
Answering Machine Override (Second Call)
Communicator
•
2 Telephone Numbers
•
Backup Reporting
•
Pager Format
•
Point ID Format
•
Individually Report 4 Users
•
Opening after Alarm Report (Cancel Code)
•
Conditional Closing Report
For Technical Assistance, Contact the NAPCO Toll Free Helpline
!
(800) 645-9440
NAPCO Security Systems, Inc.
333 Bayview Avenue
"
Amityville, New York 11701
For Sales and Repairs, call Toll Free: (800) 645-9445
Table of Contents
General Information ........................................... 2
XP-400 Features ............................................... 2
Specifications .................................................... 3
Listings and Approvals ...................................... 4
Ordering Information ......................................... 4
Optional Accessories ......................................... 4
Programming the Panel ..................................... 5
Installation ......................................................... 6
Wiring ................................................................ 6
Keypad Operation ............................................. 7
Panel Operation ................................................ 7
Bypassing ......................................................... 8
User Program Mode .......................................... 9
XP-400 Commands ........................................... 10
Dealer Commands ........................................... 11
Wireless Operation (Signal Strength) .............. 11
Zone Features ................................................... 11
System Times ................................................... 13
System Features ............................................... 13
Telephone Number 1 Programming .................. 15
Pager Programming .......................................... 15
Backup Telephone Programming ...................... 17
Telephone Number 3 Programming .................. 18
Report Codes .................................................... 18
Enhanced Communicator Features ................... 19
Wireless ............................................................ 19
Downloading ..................................................... 21
Dealer Programming ......................................... 22
System Troubles ............................................... 23
Troubleshooting ................................................ 25
XP-400 WIRING DIAGRAM .............................. 27