Filter
Top Products
16 - 1
16 COMMUNICATIONS VIA NETWORK
16
16. COMMUNICATIONS VIA NETWORK
Refer to Section "1.3.4" for the correspondence version of the Motion CPU and the
software.
The communication between the personal computer and the Motion CPU is possible
via Q series Network module (MELSECNET/10(H), Ethernet, CC-Link, RS-232 and
etc.) in the Motion CPU (Q173CPU(N)/Q172CPU(N)).
Refer to the following manuals for the specifications of each network modules of
MELSECNET/10(H), Ethernet, CC-Link and Serial communication, the handling
method.
(1) MELSECNET/10(H) module : QJ71LP21-25, QJ71LP21G, QJ71BR11,
QJ72LP25-25, QJ72LP25G, QJ72BR15
• QCPU User's Manual(Hardware Design, Maintenance and Inspection)
• Q Corresponding MELSECNET/H Network System Reference Manual(PLC to
PLC network)
• Q Corresponding MELSECNET/H Network System Reference Manual(Remote
I/O network)
(2) Ethernet interface module : QJ71E71, QJ71E71-B2, QJ71E71-100
• Q Corresponding Ethernet Interface Module User's Manual(Hardware)
• Q Corresponding Ethernet Interface Module User's Manual(Basic)
• Q Corresponding Ethernet Interface Module User's Manual(Application)
• Q Corresponding Ethernet Interface Module User's Manual(Web function)
• Q Corresponding MELSEC Communication Protocol Reference Manual
(3) CC-Link module : QJ61BT11
• QJ61BT11 Control & Communication Link System Master/Local Module User’s
Manual(Hardware)
• GX Configurator-CC Version 1 Operating Manual
• CC- Link System Master/Local Module User’s Manual
(4) Serial communication module : QJ71C24, QJ71C24-R2
• Serial Communication Module User's Manual(Hardware)
• Q Corresponding Serial Communication Module User's Manual(Basic)
• Q Corresponding Serial Communication Module User's Manual(Application)
• Q Corresponding MELSEC Communication Protocol Reference Manual