Filter
Top Products
7 - 20
7 OPERATION CONTROL PROGRAMS
F/FS G
7.5.3 Bit logical OR : |
Format (S1) l (S2) Number of basic steps 4
[Usable data]
Usable Data
Word device Constant
Setting
data
Bit device
16-bit
integer
type
32-bit
integer
type (L)
64-bit
floating
point
type (F)
Coasting
timer
16-bit
integer
type (K/H)
32-bit
integer type
(K/H, L)
64-bit
floating
point
type (K)
Calculation
expression
Bit
conditional
expression
Comparison
conditional
expression
(S1) —
—
—
— —
(S2) —
—
—
— —
: Usable
[Setting data]
Setting data Description Data type of result
(S1)
(S2)
Data which will be ORed bit-by-bit
Data type of (S1) or (S2)
which is greater
(Integer type)
[Functions]
(1) The bit-by-bit logical add of the data specified with (S1) and the data specified with
(S2) is found.
(2) When (S1) and (S2) differ in data type, the data of the smaller data type is
converted into that of the greater type before operation is performed. At this time,
note that signed data is converted.
[Errors]
(1) An operation error will occur if:
• (S1) or (S2) is an indirectly specified device and its device No. is outside the
range.
[Program examples]
(1) Program which ORs #0 and #1 and substitutes the result to D0
D0 = #0 l #1
#0
D0
0 0 1 0 0 1 0 1 0 0 1 1 0 1 0 0
b0b15
0 0 1 0 1 1 0 1 0 0 1 1 0 1 0 0
b0b15
0 0 1 0 1 0 0 1 0 0 1 0 0 1 0 0
b0b15
#1
|