Filter
Top Products
8
E
4. Operation
4.2. Switching the unit on/off
ss
ss
s Before pressing the ON/OFF button:
• Check to see if the power supply is on.
• The power supply should not be turned off while the air conditioner is
in use. This can cause the unit to break down.
1 Press the ON/OFF button.
A The ON indicator should light up.
Note:
• Even if you press the ON/OFF button immediately after shutting
down the operation in progress, the air conditioner will not start
for about three minutes. This is to prevent the internal compo-
nents from being damaged.
• If the operation stops due to a power failure, the unit will not au-
tomatically restart until the power has been restored. Press the
ON/OFF button to restart.
4.3. Cooling
1 If the unit is off, press the ON/OFF button to turn it on.
A The ON indicator should light up.
2 Press the operation mode button and select the
cooling mode .
B should be displayed.
3 If necessary, press
TEMP.
button to set the desired temperature.
See page 10 for details.
4 If necessary, press button to select a desired rate.
See page 13 for details.
5 If necessary, press to specify the vertical angle at which the
air is blowing.
See page 14 for details.
6 If necessary, press button to set the timer.
See page 11 for details.
ON OFFCLOCK
FILTER
CHECK
TEST RUN
REMOTE CONTROLLER
PAR-JH240KA
TEMP. TIMER SET
ON/OFF
–
STAND BY
DEFROST
CENTRALLY CONTROLLED
˚C
CLOCK
ON OFF
˚C
1Hr.
NOT AVAILABLE
CHECK MODE
FILTER
CHECK
TEST RUN
A
1
ON OFFCLOCK
FILTER
CHECK
TEST RUN
REMOTE CONTROLLER
PAR-JH240KA
TEMP. TIMER SET
ON/OFF
–
STAND BY
DEFROST
CENTRALLY CONTROLLED
˚C
CLOCK
ON OFF
˚C
1Hr.
NOT AVAILABLE
CHECK MODE
FILTER
CHECK
TEST RUN
1
A
B
56 42 3