11
E
4. Operation
4.8. Using the timer
ON OFFCLOCK
ss
ss
s Available Timer-Interlocked Operation Modes
1. AUTO START/STOP: Allows both start and shutdown to be interlocked
with the timer.
2. AUTO START: Allows automatic start in response to the timer setting
and shutdown to be proceeded by manually pressing the ON/OFF but-
ton.
3. AUTO STOP: Allows the start of the operation to be manually invoked
by pressing the ON/OFF button and automatic shutdown based on the
timer setting.
ss
ss
s Timer-interlocked operation is available only once for both start
and shutdown in 24 hours.
ss
ss
s While A is displayed, setting and changing of time for timer-
interlocked operation is disabled.
1 In this case, press button once to turn off the A
display
on the remote controller. This is referred to as TIMER OFF opera-
tion.
4.8. Using the timer
ON OFFCLOCK
1) Set the current time
1 Press
ON OFFCLOCK
button to display the “CLOCK” B.
• Each time you press
ON OFFCLOCK
button, the display on the remote con-
troller cyclically changes as follows.
Remote CLOCK →
CLOCK
ON
→
CLOCK
OFF
→ No Display
controller display A
2 Each time you press
TIMER SET
button, the time increases in incre-
ments of one minute. Each time you press
TIMER SET
button, the time
decreases in increments of one minute .
• Press and hold the button to rapidly change the time.
• The time changes in increments of one minute → ten minutes → in
units of hour; in this order.
• Approximately ten seconds after pressing the button, the display on
the remote controller will turn off.
ON OFFCLOCK
FILTER
CHECK
TEST RUN
REMOTE CONTROLLER
PAR-JH240KA
TEMP. TIMER SET
ON/OFF
–
STAND BY
DEFROST
CENTRALLY CONTROLLED
˚C
CLOCK
ON OFF
˚C
1Hr.
NOT AVAILABLE
CHECK MODE
FILTER
CHECK
TEST RUN
A
1
ON OFFCLOCK
FILTER
CHECK
TEST RUN
REMOTE CONTROLLER
PAR-JH240KA
TEMP. TIMER SET
ON/OFF
–
STAND BY
DEFROST
CENTRALLY CONTROLLED
˚C
CLOCK
ON OFF
˚C
1Hr.
NOT AVAILABLE
CHECK MODE
FILTER
CHECK
TEST RUN
1
2
AB
↑