Filter
Top Products
7
E
3. Components
3.2. Outdoor unit
The outdoor unit takes in and feeds outside air to the indoor unit and
exhausts heated air in the cooling or dehumidifying mode, or cool air in
the heating mode.
A Air outlet
B Air intake
B
A
PUH-2.5KA
4. Operation
4.1. Operation modes
Cooling
The air conditioner works to cool the room to the selected temperature.
The fan blows air continuously at the selected speed.
Drying (dehumidifying) : Disabled in the heat-
ing mode
The drying mode efficiently reduces the humidity in the room so that the
room temperature is not lowered excessively. When the selected room
temperature is reached in the Low setting, the airflow will stop for ten
minutes and then will resume for three minutes to keep the humidity low.
Heating
• The air conditioner works to heat the room to the selected tempera-
ture.
• When selecting the heating mode, a desired room temperature must
be set to avoid any cool air. The fan will gradually increase the airflow
delivery up to a selected rate.
• When the room temperature reaches the selected temperature and
the compressor stops, the fan will deliver a gentle airflow.
Automatic (cooling / heating)
The air conditioner automatically goes into the cooling or heating mode to
keep the room at the selected temperature.
E
ON OFFCLOCK
FILTER
CHECK
TEST RUN
REMOTE CONTROLLER
PAR-JH240KA
TEMP. TIMER SET
ON/OFF
–
STAND BY
DEFROST
CENTRALLY CONTROLLED
˚C
CLOCK
ON OFF
˚C
1Hr.
NOT AVAILABLE
CHECK MODE
FILTER
CHECK
TEST RUN
B
A
PUH-2KA