Filter
Top Products
38
RDV4136 Series Direct Vent Gas Fireplace
10010618
Ceramic refractory panels are available for the
RDV4136 fireplace.
Kit Color
RDV4136CRS Sandstone
RDV4136CRR Colonial Red
Ceramic Refractory Panels
Take care when handling the refractory
panels as they are fragile until held in place
and supported.
Installation, refer to Figures 60& 61
Turn unit off and allow to cool completely if it has been
in operation.
1. Remove valve access panel.
2. Remove the front window frame assembly.
3. Remove logs.
4. Place the rear refractory panel in place. Locate the
lower edge of the panel in the ledge formed by the
top of the rear log support.
FP1232
rear ceramic panel
11/02
Rear Refractory
Panel
Rear Panel Sup-
port Brackets
Rear Log
Support
Firebox Back
Panel
FP1232
Fig. 60 Rear refractory panel installation.
FP1848
Ceramic panels
3/08
Side
Panel
Side
Panel
Log Support
Burner Tray
Back Panel
FP1848
Fig. 61 Ceramic panel installation.
Remove Screws
Combustion
Deflector
5. Remove the three (3) screws securing the ‘deflector
front’ to the combustion dome.
6. Slide the side refractory panels into place to hold
the rear panel secure. Repeat the procedure on the
other side.
7. Replace the ‘deflector front’.
Installation complete.
Porcelain Steel Back
An optional black porcelain liner is available for the
RDV4136 fireplace.
Kit Color
RDV4136FLB Black
These panels line the inside of the firebox just as the
ceramic panels. Follow the installation instructions for
the ceramic panels to install the porcelain steel back.
Remote Controls
Optional remote control units are available to control dif-
ferent functions of the appliances. RN/RP models only.
Model Function(s) Controlled
RC1 ON/OFF
RC2 ON/OFF and temperature
IMTFK Wall mounted thermostat control
Trim Kits
Georgian Trim Kit
41DVSGTKCB Classic Black
41DVSGTKB Ebony
Medium Trim Kit
4136TKMB-A Black
Screen Door Kit
RDV4136SDK Black
Back-up Battery Kit
All models: DVTBBK
Follow instructions provided with the kit for installation.