Filter
Top Products
Table Of Contents
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
20 Amp Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
15 Amp Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Grounding Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Extension Cord Selection . . . . . . . . . . . . . . . . . . . . . . . . . 4
Initial Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Purging the Sprayer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Operating the Sprayer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Setting the Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Using the Spray Gun. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Pressure Relief Procedure. . . . . . . . . . . . . . . . . . . . . . . . . 6
Priming the Sprayer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Spraying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Spraying Techniques . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Practice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Cleanup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Daily Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Additional Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Parts Listings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Drive Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Pressure Control Assembly . . . . . . . . . . . . . . . . . . . . . . . 36
Motor Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Transducer Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Fluid Section Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Filter/Valve Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
PRIME/SPRAY Valve Assembly. . . . . . . . . . . . . . . . . . . . 42
Cart Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Gun Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Pressure Control WIring Diagram . . . . . . . . . . . . . . . . . . 45
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Specifications
Model EP2510 120V
20 Amp Mode
Gallons per minute (GPM) . . . . . . . 1.25
Fluid section . . . . . . . . . . . . . . . . . dual stroke static packing
with reversible valve seats
Maximum pressure . . . . . . . . . . . . 3000 PSI
Motor electric (universal) . . . . . . . . 1.5 HP
Amperage . . . . . . . . . . . . . . . . . . . 17 amps
Electrical protection . . . . . . . . . . . . 22 amp circuit breaker
Maximum tip size. . . . . . . . . . . . . . 1 gun: .035"; 2 guns:
.023"
Hose length. . . . . . . . . . . . . . . . . . 300 feet
Maximum extension cord. . . . . . . . 100 feet, 12 gauge
Weight. . . . . . . . . . . . . . . . . . . . . . 110 lbs.
Dimensions . . . . . . . . . . . . . . . . . . 33" L x 41" H x 26" W
15 Amp Mode
Gallons per minute (GPM) . . . . . . . 0.8
Fluid section . . . . . . . . . . . . . . . . . dual stroke static packing
with reversible valve seats
Maximum pressure . . . . . . . . . . . . 3000 PSI
Motor electric (universal) . . . . . . . . 1.5 HP
Amperage . . . . . . . . . . . . . . . . . . . 15 amps
Electrical protection . . . . . . . . . . . . 20 amp circuit breaker
Maximum tip size. . . . . . . . . . . . . . 1 gun: .027"; 2 guns:
.019"
Hose length. . . . . . . . . . . . . . . . . . 200 feet
Maximum extension cord. . . . . . . . 100 feet, 12 gauge
Weight. . . . . . . . . . . . . . . . . . . . . . 110 lbs.
Dimensions . . . . . . . . . . . . . . . . . . 33" L x 41" H x 26" W
2 © SprayTECH Corporation. All rights reserved.
Safety Precautions
This manual contains information which must be read and
understood before using the equipment. When you come to an
area which has one of the following symbols, pay particular
attention and make certain to heed the safeguard.
This symbol indicates a potential hazard which may cause serious
injury or loss of life. Important safety information will follow.
This symbol indicates a potential hazard to you or to the
equipment. Important information that tells how to prevent
damage to the equipment or how to avoid causes of minor
injuries will follow.
HAZARD: INJECTION INJURY - A high pressure stream
of paint produced by this equipment can pierce
the skin and underlying tissues, leading to
serious injury and possible amputation.
PREVENTION:
• The maximum operating range of the unit is 3000 PSI fluid
pressure.
• NEVER aim the gun at any part of the body.
• NEVER allow any part of the body to come in contact with
the fluid stream. DO NOT come in contact with a fluid
stream created by a leak in the fluid hose.
• NEVER put your hand in front of the gun. Gloves will not
provide protection against an injection injury.
• ALWAYS lock the gun trigger, shut the fluid pump off and
release all pressure before servicing, cleaning the tip
guard, changing tips, or leaving unattended. Pressure will
not be released by turning off the motor. The
PRIME/SPRAY knob must be turned to PRIME to relieve
the pressure. Refer to the PRESSURE RELIEF
PROCEDURE described in this manual.
• ALWAYS have the tip guard in place while spraying. The
tip guard provides some protection against injection
injuries but is mainly a warning device.
• ALWAYS remove the spray tip before flushing or cleaning
the system.
• The paint hose can develop leaks from wear, kinking and
abuse. A leak is capable of injecting material into the skin.
Inspect the paint hose before each use.
• NEVER use a spray gun which does not have a trigger
lock or trigger guard in place and in working order.
• All accessories must be rated at or above 3000 PSI. This
includes spray tips, guns, extensions, and hose.
• In case of a skin injection, see a physician immediately.
NOTE TO PHYSICIAN:
Injection into the skin is a traumatic injury. It is important
to treat the injury surgically as soon as possible. DO NOT
delay treatment to research toxicity. Toxicity is a concern
with some coatings injected directly into the blood
stream. Consultation with a plastic surgeon or
reconstructive hand surgeon may be advisable.
DO NOT TREAT AN INJECTION INJURY AS A
SIMPLE CUT! Injection can lead to
amputation. See a physician immediately.
WARNING
NOTE: Notes give important information which should
be given special attention.
CAUTION
WARNING
English